Aquanello Eterna Wall Mounted Faucet Chrome Look Stainless Steel ET4003-01

The Aquanello Eterna wall-mounted cold-water fountain faucet in chrome finish (ET4003-01) is a compact and minimalist wall-mounted faucet designed for a toilet fountain or small sink. The faucet is connected directly to the wall, allowing the fountain or sink itself to remain free of a faucet hole.

The faucet is made of high-quality stainless steel. For the -01 color finish, the visible stainless steel is polished to a very smooth, mirror-like finish. This creates a luxurious chrome look with a bright and highly reflective surface.

Important: The ET4003-01 is not traditionally chrome-plated. The glossy appearance is achieved by mirror-polishing the stainless steel itself. Therefore, no separate chrome plating or PVD color coating is applied.

Wall-mounted cold-water faucet

The Aquanello Eterna ET4003-01 is specifically designed as a cold-water faucet. The faucet is connected to a single cold-water line and does not mix hot and cold water.

The integrated control allows the cold water flow to be easily turned on, turned off, and regulated.

The faucet is suitable for, among other things:

• Toilet fountains
• Guest bathrooms
• Small sinks
• Minimalist wall-mounted installations
• Restrooms with cold-water connections only

Chrome-like finish thanks to mirror-polished stainless steel

The color code -01 refers to a mirror-polished stainless steel finish in this Aquanello Eterna model.

The stainless steel surface is polished very finely until a smooth and highly reflective finish is achieved. This gives the faucet the bright appearance characteristic of traditional chrome, while the visible material itself remains stainless steel.

• Base material: Stainless steel
• Finish: Mirror-polished
• Appearance: Chrome-like / high-gloss
• Traditional chrome plating: No
• PVD: No

Sleek wall-mounted design

The ET4003-01 is mounted directly against the wall. The water supply is located behind the wall, leaving only the compact faucet and round cover rosette visible.

Because the faucet is connected from the wall, no drain hole is needed in the sink or washbasin. This makes it possible to create a particularly clean and minimalist sink setup.

Spout length of approximately 100 mm

The wall-mounted sink faucet has a spout length of approximately 100 mm. This directs the water stream from the wall toward the sink or small washbasin.

The round spout has a diameter of approximately Ø24 mm and slopes downward at an angle of approximately 35°.

By carefully adjusting the mounting height and position to match the chosen basin, the water stream can be optimally directed into the basin.

Compact design, approximately 74 mm high

The total height of the faucet is approximately 74 mm. This keeps the design compact against the wall, and the faucet takes up minimal visual space.

The combination of the short projection, smooth rounded shape, and integrated controls makes the ET4003-01 particularly suitable for smaller restrooms.

G1/2 wall connection

The ET4003-01 features a standard G1/2 wall connection. This allows the faucet to be connected to a standard cold-water system.

After installation, the technical connection is neatly concealed behind the round cover plate.

Round cover plate, approximately Ø55 mm

The wall connection is finished with a round rosette with a diameter of approximately Ø55 mm.

The rosette’s design perfectly complements the cylindrical style of the Aquanello Eterna series and ensures a clean transition between the faucet and the wall.

No coating—just polished stainless steel

With the ET4003-01, the chrome look is not achieved through a decorative coating, PVD layer, or traditional chrome plating.

Instead, the stainless steel surface is mechanically polished to a very smooth, high-gloss, mirror-like finish. As a result, the stainless steel itself remains the visible surface finish.

This gives the faucet a bright and luxurious appearance that pairs perfectly with other glossy bathroom fixtures.

Characteristics of mirror-polished stainless steel

• Genuine stainless steel: The stainless steel forms the visible surface
• Mirror-polished: smooth and highly reflective
• Chrome look: classic high-gloss bathroom aesthetic
• No PVD: no decorative PVD color coating
• Not traditionally chrome-plated: no separate chrome layer over the stainless steel
• Timeless: easy to combine with a variety of bathroom styles

Care of mirror-polished stainless steel

Water droplets and fingerprints are generally more visible on a mirror-polished surface than on brushed stainless steel. Wiping it down regularly helps maintain its bright appearance.

We recommend cleaning the faucet with a soft, damp cloth and, if desired, drying it with a soft cloth.

Avoid abrasive sponges and harsh, highly acidic, or alkaline cleaning agents, as these can damage the polished surface.

No faucet hole required in the sink

A key advantage of this wall-mounted sink faucet is that the sink itself does not require a faucet hole.

This allows the ET4003-01 to be combined with compact or minimalist sinks where only the basin remains visible and the faucet is supplied from the back wall.

Minimalist Eterna design

The Aquanello Eterna series is characterized by rounded shapes, cylindrical components, and minimalist details. The ET4003-01 follows this design style with a compact round rosette, curved spout, and subtle controls.

The mirror-like chrome finish pairs easily with a variety of materials, such as:

• White ceramic
• Marble
• Natural stone
• Travertine
• Concrete-look
• Wood and wood-look

Key features

• Brand: Aquanello
• Series: Eterna
• Model: ET4003-01
• Color code: -01
• Product Type: Wall-mounted sink faucet / cold-water faucet
• Color: Chrome finish
• Base material: Stainless steel
• Surface finish: Mirror-polished stainless steel
• Appearance: High-gloss / mirror-like
• Traditionally chrome-plated: No
• PVD: No
• Water connection: Cold water
• Mixing faucet: No
• Thermostatic: No
• Installation: Wall-mounted
• Spout length: approx. 100 mm
• Total height: approx. 74 mm
• Spout diameter: approx. Ø24 mm
• Spout angle: approx. 35° downward
• Wall connection: G1/2
• Cover plate diameter: approx. Ø55 mm
• Operation: Manual
• Self-closing: No
• Application: Toilet fountain / small sink
• Style: Modern / timeless / minimalist
• Warranty: 5 years

Wall-mounted faucet in mirror-polished stainless steel with a chrome finish

The Aquanello Eterna ET4003-01 combines a compact wall-mounted faucet with the bright and luxurious look of mirror-polished stainless steel.

The combination of the 100 mm spout, G1/2 wall connection, Ø55 mm cover rosette, and high-quality mirror-polished stainless steel finish creates a sleek and timeless cold-water faucet.

Because the chrome-like appearance is achieved directly by mirror-polishing the stainless steel, no traditional chrome plating is required. The result is a minimalist, Eterna wall-mounted faucet with a bright, high-gloss finish for both modern and timeless restroom spaces.

The majority of our orders are shipped with various carriers. Sometimes we use other carriers to deliver specific orders or to ease the load on the main carriers to meet our delivery promises.

The expected delivery time is always shown on the product page. Most products that we have in stock are shipped the same day. The evening before delivery, you will receive tracking information with a time window for the delivery. Important to know: the drivers of our chosen carriers deliver the products to the front door on the ground floor.

Also, for larger products such as granite sinks, large fragile sinks, cabinets, etc., you will receive a tracking code in the evening. These products are not delivered to the neighbors and a signature is required, so someone must be home to receive the product. Note: these large products are not delivered on Saturdays!

If the delivery of a large product fails on the first attempt, the carrier will contact you via email or SMS to send you a schedule so you can choose a time when you will be home.

Delivery surcharges of €30 to €100 apply for shipments to islands, due to additional logistical costs such as water transport and limited accessibility, and there are surcharges for pallet shipments for transporting fragile and heavier products.